Two layers, two jobs
The black top layer keeps light off the soil. The white bottom layer passes water into the soil through the natural pores of the fabric.
A two-layer nonwoven roll that carries furrow water to the base of every tree and covers the soil at the same time.
Contact sales
doesn’t always reachthe tree
In an earthen furrow, some of the water soaks into the ground along the way, some evaporates, and weeds sprout along the banks.
before itreaches the roots
Yazdlaie tubular mulch carries water from the main channel along the row by gravity and releases it slowly into the soil through its bottom layer.
How it worksThe black top layer keeps light off the soil. The white bottom layer passes water into the soil through the natural pores of the fabric.
The same main channel and the same water-share schedule. In orchards with enough level difference, no pump is needed.
Water leaves through the fabric surface, not through emitters, so the small fittings and filtration of a drip system are no longer needed.
A short piece of PVC pipe keeps the opening open, and water from the main channel flows into the space between the two layers on its usual schedule.
Water travels along the row and seeps slowly and directly into the soil at the base of each tree through the natural pores of the bottom layer.
The end of the row is sealed so water has time to seep out along its full length, while the black layer keeps the soil covered.
* The final fabric weight will be set after durability and seepage testing.
Covering the soil blocks part of the direct evaporation, so the ground underneath stays moist.
Water is delivered from the main channel as always, with no change to the irrigation schedule.
At trees that need more water, gentle pressure opens the pores of the white layer locally.
The mulch itself, a short pipe at the opening, a little soil and a few stones.
Install one row as a trial and check the water output at its start, middle and end. So our sales specialists can recommend the right width, length and installation method, have this information ready:
Turn on the water and watch the flat mulch fill along the row while water seeps into the soil beneath it.
For growers, input suppliers and irrigation contractors. The right size for each orchard is recommended based on its furrows and row length.
Contact sales
No. Water leaves through the pores of the bottom fabric layer, not through emitters. It is seepage irrigation fed by gravity.
In orchards with enough elevation difference and head, the mulch is designed to work by gravity. The hydraulic conditions of each orchard are reviewed before purchase.
The aim is to limit weed growth in the covered area. Results depend on full surface coverage, product durability, weed type and installation method.
No validated measurements have been published for this product yet, so we will not state a fixed percentage until field testing is complete. Savings depend on soil type, slope, air temperature, fabric weight and irrigation timing.
With sediment-laden water or water with scale-forming salts, any seepage system needs to be monitored for clogging. In these conditions, we recommend starting with a one-row trial.
